Chip load and chip thinning
每齿进给量与切屑减薄
In plain words
Each tooth of the cutter slices off one small chip. How thick that chip is matters: too thin and the tooth just rubs and gets hot, too thick and it snaps.
What it is
Chip load is the thickness each tooth removes: vf = fz × z × n (feed per tooth × teeth × rpm). Too little rubs and wears the tool; too much breaks it. When the radial cut is less than half the tool diameter, the real chip gets thinner, so feed should be raised to compensate.
Why it matters for products
The basis of feed-rate optimization and of modern high-efficiency toolpaths.